- Jan 21, 2007
- 4,995
- 6,450
There are several different ways to initiate a twist. The extent to which each should be used is something that coaches do not always agree on.
Here's my take on it:
There are two that you need to know about: asymmetrical arm movement and contact twisting.
Contact twisting. This essentially means getting your twist from the floor. For this to occur the shoulderst must begin twisting before the feet leave the floor. Many coaches say that this technique is incorrect, but in my opinion this isn't inherently true; it's just MUCH more difficult to use this technique without causing other problems, which is why most coaches don't teach twisting this way (at least not right off the bat).
The second method of twisting uses asymmetrical arm motion. The specifics of why this works are a bit more complicated (though there's a great article about it here), but the basic idea is that by dropping one arm to the side faster/earlier than the other, the balance of the flip is offset slightly in such a way that some of your flip rotation turns into twist rotation. It's hard to get into the specifics of how to do this without being able to work with you in person.
Because this technique has less tendency to mess up the takeoff for the flip, this is generally the method preferred by most coaches. Using this technique, it is possible to generate twist rotation after your feet have left the floor.
So which would I teach? Well, I would focus primarily on using asymmetrical arm movement to generate the rotation after leaving the floor; however, I would keep in mind that it is almost certain that you will end up doing at least a little bit of a contact twist, and as long as you're not compromising your set technique to do so, that's ok.
EDIT: Sorry, I should have read your posts better: this is mainly for back twisting. There are a couple tricks that may help you on front twisting; I'll expand on those later tonight when I have a bit more time
Here's my take on it:
There are two that you need to know about: asymmetrical arm movement and contact twisting.
Contact twisting. This essentially means getting your twist from the floor. For this to occur the shoulderst must begin twisting before the feet leave the floor. Many coaches say that this technique is incorrect, but in my opinion this isn't inherently true; it's just MUCH more difficult to use this technique without causing other problems, which is why most coaches don't teach twisting this way (at least not right off the bat).
The second method of twisting uses asymmetrical arm motion. The specifics of why this works are a bit more complicated (though there's a great article about it here), but the basic idea is that by dropping one arm to the side faster/earlier than the other, the balance of the flip is offset slightly in such a way that some of your flip rotation turns into twist rotation. It's hard to get into the specifics of how to do this without being able to work with you in person.
Because this technique has less tendency to mess up the takeoff for the flip, this is generally the method preferred by most coaches. Using this technique, it is possible to generate twist rotation after your feet have left the floor.
So which would I teach? Well, I would focus primarily on using asymmetrical arm movement to generate the rotation after leaving the floor; however, I would keep in mind that it is almost certain that you will end up doing at least a little bit of a contact twist, and as long as you're not compromising your set technique to do so, that's ok.
EDIT: Sorry, I should have read your posts better: this is mainly for back twisting. There are a couple tricks that may help you on front twisting; I'll expand on those later tonight when I have a bit more time
Last edited: